EASY ASSEMBLY
Your new Night Air® Smart Zone Bed arrives compressed in two boxes. Box 1 includes the compressed mattress assembly. Box 2 includes the air cores, processor and hand controls.
GETTING STARTED
Open all boxes. Make sure you have all of the components listed above. If you are missing any item(s), please contact a Sleep Specialist toll free at 1-800-289-2693.
Decide where to place your new Smart Zone Bed. Make sure that there is an electrical outlet nearby.
Assemble your bed frame (sold separately). If using a slat support system and not an adjustable bed base or heavy duty metal bed frame, make sure to position the slats evenly to support the foundation. If your bed has fewer than three slats, we suggest adding additional slats to ensure adequate support of your Night Air® Adjustable Air Number Bed.
Surge protector recommended. Your limited warranty does not cover damage due to a power surge, regardless of the source. See warranty terms for complete details.
Smart Zone Bed Set-Up
Remove the compressed and rolled mattress from Box 1 and place on your adjustable base, platform bed frame or foundation.
Cut the vacuum-sealed plastic around the mattress and unroll. Avoid using sharp tools that may damage the material. Allow the mattress to fully expand; this process typically takes less than one hour.
Center expanded mattress on your foundation or frame with the opening in the cover for the air hoses at the head of the bed and the cover zipper pulls at the foot of the bed.
Remove the foam comfort layer and set aside for easier set up. You do not need to remove cover to complete assembly.
Remove the air cores from Box 2. Place the two uninflated air cores side by side in the support tray. Make sure hoses are facing each other and are at the head of the bed.
Insert the air hoses through the hole at the head of the bed. Make sure hoses are not kinked. All excess hose should be pulled through the opening. A 2-Zone Smart Zone Bed will only have 2 hoses.
Place air processor under the hoses protruding from head of bed. Connect color coded hoses to the corresponding color coded nozzles on the processor. Hoses will ‘click’ when securely connected. A 2-Zone Smart Zone Bed will only have two color coded hoses.
Attach one hand control to the ‘LH connector and one to the ‘RH’ connector on the air processor. Plug the processor into a surge protector.
Fully inflate the air cores by pressing the auto fill button on each control. Standing at the foot of the bed the ‘LH’ control operates the left side and the ‘RH’ control operates the right side of the bed.
While inflating the air cores confirm the controls are operating the correct side of the bed. If reversed, follow cords to connectors on the processor. Verify the right control is plugged into ‘RH’ and the left control is plugged into ‘LH’
Recenter the air cores inside the foam support tray. Then return the foam comfort layer to the top of the inflated air cores. Center foam on top of the air cores.
Pull the top cover back over the foam comfort layer and re-zip into place. You are now ready to enjoy your new Night Air Smart Zone Bed. Please allow up to 72 hours for the foam to completely expand to its original size and shape.
Find your number and enjoy a better night’s sleep. Our patented process scientifically calculates your ideal Support Index® based upon your body shape and size, sleep characteristics and sleep style.
GET COMFORTABLE
Operating Your 6-Zone Hand Controls
Say goodbye to back pain. With our state-of-the-art technology, you can adjust the lumbar area of each side of our 6-Zone number beds separately from the head/foot sections. Take control of the exact level of comfort and support you need by adjusting your comfort and support levels in all three zones in single digit increments from 1 to 100. You will not find this level of precise adjustment with any other number air bed on the market, including Sleep Number®* air beds. Two hand controls are standard with your new Night Air® 6-Zone Sleep Systems.
CLICK HERE to see how easy it is to operate this hand control. Or watch the video below.
How to Operate Your 6-Zone Hand Control
Operating Your 2-Zone Hand Controls
Why settle when it comes to your sleep. Stop compromising with your partner when it comes to the ideal feel of your mattress. With the touch of a button you can independently adjust each side of the number bed from soft to firm. Our state-of-the-art technology allows you to fine tune your comfort and support level in single digit increments from 1 to 100. You will not find this level of precise adjustment with any other air bed on the market, including Sleep Number®* air beds. Two hand controls are standard with your new Night Air® 2-Zone Sleep Systems.
CLICK HERE to see how easy it is to operate this hand control. Or watch the video below.
How to Operate Your 2-Zone Hand Control
FIND YOUR SMART SUPPORT NUMBER
Take the Guesswork Out of Setting Up Your Number Bed
With other manufacturers, including Sleep Number®, you will need to use trial and error to find your ideal support number. Not so with Night Air® Smart Zone Beds. Our patented process scientifically calculates your ideal Support Index® based upon your body shape and size, sleep characteristics and sleep style.